Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg to Experience our World of Flavor™ at:
Want to see how the EGG is made? Click to Watch
Facebook | Twitter | Instagram | Pinterest | Youtube | Vimeo
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
Dimensions for an xl table
Options
Btbeam
Posts: 25
I am in the process of building a table for my new xl. I see on the plans that you need 12.5" from the tom to the lower shelf because of the way the hinge drops down. Is that in fact correct? I have seen some discussion about a redesign of the hinge just wanted to be sure before I continue. Also does anyone have a pic of theirs using the 12.5 height. I am just concerned it will seem to high. Thanks
Comments
-
Good question. I just bought an xl 3 weeks ago. After researching about table everywhere I could find any info I built what I thought I wanted. I used to dimensions from the naked whiz site then modified mine to what worked for me. 12.5 is the depth that I usedSwampeast , MO XL 2013 MM 2015
-
I'm trying to put a picture up. But apparently I'm not smart enough. Wait for itSwampeast , MO XL 2013 MM 2015
-
Thanks for the help would it be easier to send the picture to my email? Does it seem to high for you or does it look ok Thanks again
-
Post your info and I'll send it to ya. It's not to tall for me that said I only built it the legs 30" and used 5 in castersSwampeast , MO XL 2013 MM 2015
-
btbeam68@gmail.com
-
Email headed your way. Hope it helpsSwampeast , MO XL 2013 MM 2015
-
Thanks for the pics I appreciate it that's using the 12.5? It looks good thanks again
-
I just measured to get exact. It's 13 1/4 from the top of the middle shelf to the top of the table. Then the egg is sitting in a 1 1/2 " paverSwampeast , MO XL 2013 MM 2015
-
Turk2011 said:I just measured to get exact. It's 13 1/4 from the top of the middle shelf to the top of the table. Then the egg is sitting in a 1 1/2 " paverTurk2011 said:I just measured to get exact. It's 13 1/4 from the top of the middle shelf to the top of the table. Then the egg is sitting in a 1 1/2 " paver
-
Thanks a lot
-
I built a table for my XL and used the 12.5" dimension. It is right - I am using the table nest for support.On a separate note, if you plant to use a table cover from BGE, hold to their dimensions - I went too long by an inch and it is tight. Can give you top dimensions and drawing if you are interested- a bit more detail than the drawing on the BGE site
XLBGE, Small BGE, Homebrew and GuitarsRochester, NY
Categories
- All Categories
- 182.7K EggHead Forum
- 15.7K Forum List
- 459 EGGtoberfest
- 1.9K Forum Feedback
- 10.3K Off Topic
- 2.2K EGG Table Forum
- 1 Rules & Disclaimer
- 9K Cookbook
- 12 Valentines Day
- 91 Holiday Recipes
- 223 Appetizers
- 516 Baking
- 2.4K Beef
- 88 Desserts
- 163 Lamb
- 2.4K Pork
- 1.5K Poultry
- 30 Salads and Dressings
- 320 Sauces, Rubs, Marinades
- 543 Seafood
- 175 Sides
- 121 Soups, Stews, Chilis
- 35 Vegetarian
- 100 Vegetables
- 312 Health
- 292 Weight Loss Forum