Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg to Experience our World of Flavor™ at:
Want to see how the EGG is made? Click to Watch
Facebook | Twitter | Instagram | Pinterest | Youtube | Vimeo
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
Introducing "The Baller" - stay-cool intake vent mod
Options
caliking
Posts: 18,731
I may have posted this earlier - my apologies if I did, but @Mickey asked for a separate thread. And what Mickey wants... Mickey gets. Or else he won't let me into Salado next year, even worse he may not cut me a deal on the Toyota truck of my dreams
The newer LBGE's have a rubber/silicone cover on the intake vent tab which takes away the sharp edge of the steel, and stays cool to the touch. I wanted something similar for my small and mini eggs, that would make it easier to adjust the intake setting.
Took a 1/4" carriage bolt and a phenolic ball knob (available from Amazon and McMaster-Carr, I believe). Took the sliding vent panel off, and drilled a hole in the tab. Screwed on the nuts to keep it in place. Screwed on the ball knob at the other end. Bent the tab forward a bit for clearane, a little more on the mini to clear the Carten.
Easy peasy. Did this for the small and the mini. Makes adjusting the intake easier since the knob is larger then the little tab. Plus it keeps your fingers away from the hot base of the egg.
A happy BGE family in Houston, TX.
Comments
-
Speaking of mods, @Solson005 - you had posted a pic some time back about a bottle cap catcher you added to your small EggCarten. How did you attach it, and where did you buy it from?#1 LBGE December 2012 • #2 SBGE February 2013 • #3 Mini May 2013A happy BGE family in Houston, TX.
-
That is so cool. Thank you.Salado TX & 30A FL: Egg Family: 3 Large and a very well used Mini, added a Mini Max when they came out (I'm good for now). Plus a couple Pit Boss Pellet Smokers.
-
But I enjoyed the threads that would pop up every now and again with somebody complaining about slicing their finger off due to the razor sharp tab!
Steve
XL, Mini Max, and a 22" Blackstone in Cincinnati, Ohio -
-
Which came first the chicken or the egg? I egged the chicken and then I ate his leg.
-
YEMTrey said:But I enjoyed the threads that would pop up every now and again with somebody complaining about slicing their finger off due to the razor sharp tab!SMITTYtheSMOKER said:
Why not a "cinch" bolt?
#1 LBGE December 2012 • #2 SBGE February 2013 • #3 Mini May 2013A happy BGE family in Houston, TX. -
My mini has the rubber tab, but still might add this mod.... althought I am sorry you voided your warranty :ar!Columbia, SC --- LBGE 2011 -- MINI BGE 2013
-
You should just make up a bunch and sell them for $XX.00Salado TX & 30A FL: Egg Family: 3 Large and a very well used Mini, added a Mini Max when they came out (I'm good for now). Plus a couple Pit Boss Pellet Smokers.
-
@Chubbs - that's okay. The ss vent panel is the last thing I expect to break. Now that I've said that, watch it disinegrate as soon as I get home today!My mini has the new handle and the lighter gray gasket, so I thought it was a later model, but maybe they added the tab later. When did you buy yours?#1 LBGE December 2012 • #2 SBGE February 2013 • #3 Mini May 2013A happy BGE family in Houston, TX.
-
Cool mod! Does the knob get hot? It looks like the nut is touching the vent panel.. Just wondering.
LBGE
MS Gulf Coast - Proud member of the Who Dat Nation!
My Not Frequently Updated Basically Dead Blog: http://datcue.wordpress.com -
bccomstock said:Cool mod! Does the knob get hot? It looks like the nut is touching the vent panel.. Just wondering.#1 LBGE December 2012 • #2 SBGE February 2013 • #3 Mini May 2013A happy BGE family in Houston, TX.
-
Nice mod...
I roll stock on the frame. Hi que in the mini..
Oops I have a Rutland on the mini too
Large is stock..Seattle, WA -
@SkinnyV: did the HiQue make a big difference in the mini? I seem to be able to hit high temps pretty easily. Was not the case with my small so I got the HiQue for that one.#1 LBGE December 2012 • #2 SBGE February 2013 • #3 Mini May 2013A happy BGE family in Houston, TX.
-
Group buy!Mickey said:You should just make up a bunch and sell them for $XX.00
Mamaroneck -
Sell the idea to mangrates?
"Entrepreneurs are simply those who understand that there is little difference between obstacle and opportunity, and are able to turn both to their advantage."
-
Other than really burning all the lump I don't remember having an issue. If you are fine I say hold off.caliking said:@SkinnyV: did the HiQue make a big difference in the mini? I seem to be able to hit high temps pretty easily. Was not the case with my small so I got the HiQue for that one.
My large is great with the stock grate wont be changing it.
Seattle, WA -
Had mine a month or two.caliking said:@Chubbs - that's okay. The ss vent panel is the last thing I expect to break. Now that I've said that, watch it disinegrate as soon as I get home today!
My mini has the new handle and the lighter gray gasket, so I thought it was a later model, but maybe they added the tab later. When did you buy yours?Columbia, SC --- LBGE 2011 -- MINI BGE 2013 -
Real Men burn their fingers and have another beer. :P_____________
"Pro-Life" would be twenty students graduating from Sandy Hook next month
-
Wait... @mickey is a Toyota dealer in GST too?XL, Small, Mini & Mini Max Green Egg, Shirley Fab Trailer, 6 gal and 2.5 gal Cajun Fryers, BlueStar 60" Range, 48" Lonestar Grillz Santa Maria, Alto Shaam 1200s, Gozney Dome, Gateway 55g Drum
-
Smart men have unburnt fingers and can still FEEL the beer they're holding.#1 LBGE December 2012 • #2 SBGE February 2013 • #3 Mini May 2013A happy BGE family in Houston, TX.
-
@SmokeyPitt sorry to tell you but I clicked on disagree while scrolling down on my iPhone. Wish I could take it back but I can't. I would have given it 2 thumbs up!
-
Thatgrimguy said:
Wait... @mickey is a Toyota dealer in GST too?
Yes. GM in Killeen. Who/where are you?Salado TX & 30A FL: Egg Family: 3 Large and a very well used Mini, added a Mini Max when they came out (I'm good for now). Plus a couple Pit Boss Pellet Smokers. -
Deviledegger said:@SmokeyPitt sorry to tell you but I clicked on disagree while scrolling down on my iPhone. Wish I could take it back but I can't. I would have given it 2 thumbs up!Which came first the chicken or the egg? I egged the chicken and then I ate his leg.
-
@Deviledegger you can take it away if you are on a computer or mobile device as far as I know. I know I can on my laptop and phone, just click disagree again and it should go away. One of the few things on Vanilla that can be edited once it is submitted.
I raise my kids, cook and golf. When work gets in the way I'm pissed, I'm pissed off 48 weeks a year.Inbetween Iowa and Colorado, not close to anything remotely entertaining outside of football season. -
@Scottborasjr Thanks for the tip. I wasn't sure what would happen so i just explained my case. Lol
-
No prob man . I'm sure I have had a stray disagree here and there myself. I will just flag you as a troll for good measure :PSmokeyPitt said:Deviledegger said:@SmokeyPitt sorry to tell you but I clicked on disagree while scrolling down on my iPhone. Wish I could take it back but I can't. I would have given it 2 thumbs up!
That's funny. I like that!
-
what about that plastic dip stuff that home depot sells for coating bare metal plier handles and such... dip the handle tab in that stuff... it dries and bingo... rubberized coated tabs for the screen and slider door
-
I like it! How easy is it to take the door off? I swap out the door with the adapter for my digiQ quite often so I am ok with just the loose door from the factory, but I do like this.As far as the bottle catcher it is just a rare earth magnet I didn't know if I wanted to make it a permanent part of my eggCarten so I just used painters tape to see if it was strong enough to catch bottle caps. I would probably order a stronger one that is smaller if I were to actually use silicone or drill a hole to attach with a bolt. But it works pretty good, I already had the magnet so I am not sure how many pounds it is supposed to hold.Large & Small BGE, CGW Two-Tier Swing Rack for BOTH EGGS, Spider for the Wok, eggCARTen & and Cedar Pergola my Eggs call home in Edmond, OK.
-
@jimreed777: that would probably work too. I had the parts I needed lying around the garage. The ball knob is bigger than the tab on the mini vent panel though, so is a little easier to hold.@Deviledegger - I have been guilty of the same. No worries#1 LBGE December 2012 • #2 SBGE February 2013 • #3 Mini May 2013A happy BGE family in Houston, TX.
-
Solson005 said:I like it! How easy is it to take the door off? I swap out the door with the adapter for my digiQ quite often so I am ok with just the loose door from the factory, but I do like this.As far as the bottle catcher it is just a rare earth magnet I didn't know if I wanted to make it a permanent part of my eggCarten so I just used painters tape to see if it was strong enough to catch bottle caps. I would probably order a stronger one that is smaller if I were to actually use silicone or drill a hole to attach with a bolt. But it works pretty good, I already had the magnet so I am not sure how many pounds it is supposed to hold.
Redneck Riviera, Gulf Shores, Alabama
Categories
- All Categories
- 182.7K EggHead Forum
- 15.7K Forum List
- 459 EGGtoberfest
- 1.9K Forum Feedback
- 10.3K Off Topic
- 2.2K EGG Table Forum
- 1 Rules & Disclaimer
- 9K Cookbook
- 12 Valentines Day
- 91 Holiday Recipes
- 223 Appetizers
- 516 Baking
- 2.4K Beef
- 88 Desserts
- 163 Lamb
- 2.4K Pork
- 1.5K Poultry
- 30 Salads and Dressings
- 320 Sauces, Rubs, Marinades
- 543 Seafood
- 175 Sides
- 121 Soups, Stews, Chilis
- 35 Vegetarian
- 100 Vegetables
- 313 Health
- 293 Weight Loss Forum