Share your photos by tagging us and using the hashtag #BigGreenEgg.
Want to see how the EGG is made? Click to Watch
CERAMIC FLOOR TILE?
The egg will be in a TABLE NEST and have a 2" air gap between it and the and the ceramic floor tile below.
Can the tile handle the heat (it is ceramic right?) and weight? I guessing the tiles are 1/2 to 3/4" thick.
Thanks.
Comments
-
I'd be more worried about a ceramic floor tile handling the weight of the egg.Depending, of course, on how the tile is situated in or on your table.---------------------------------------------------------------------------------Well, "spa-Peggy" is kind of like spaghetti. I'm not sure what Peggy does different, if anything. But it's the one dish she's kind of made her own.____________________Aurora, Ontario, Canada
-
Whats best for placing the table nest on than....directly on the table or is some kinda stone required here?? Is a air gap enough?
Hows ya gettin' on, me ol ****?Kippens.Newfoundland and Labrador. (Canada). -
I think the air gap is recommended no matter what you put under your egg. Without knowing your table design though it is hard to say if the ceramic tile will support it's weight. If your tile is just resting on cleats then I would say no. If your tile is sitting on solid wood the the weight would not be a problem.Now that I've given it a few more minutes of thought though I would recommend that you err on the side of caution and go with something a little thicker than a ceramic floor tile (for safety reasons).---------------------------------------------------------------------------------Well, "spa-Peggy" is kind of like spaghetti. I'm not sure what Peggy does different, if anything. But it's the one dish she's kind of made her own.____________________Aurora, Ontario, Canada
-
Thanks texanofthenorth maybe some firebrick is a better idea.
.
I am planning on going 17" from the shelf of table to tabletop.That's the 15" recommended by bge plus the an extra two inches to accomidate the height the table nest gives.
Hows ya gettin' on, me ol ****?Kippens.Newfoundland and Labrador. (Canada). -
I've got my large on a table nest and sitting on an 18" square ceramic tile piece in my table. I do have 4 2X2's underneath the tile to help handle the weight. Table is 6 months old and no heat or weight issues.
Damascus, VA. Friendliest town on the Appalachian Trail.
LBGE Aug 2012, SBGE Feb 2014
-
Patio stone is very cheap and the big box stores have a good selection of colors. They are about two inches thick, and will handle both the heat and weight much better than ceramic tile. Just for peace of mind, i would go with a patio stone. My $ .02
-
SWVABeanCounter said:
I've got my large on a table nest and sitting on an 18" square ceramic tile piece in my table. I do have 4 2X2's underneath the tile to help handle the weight. Table is 6 months old and no heat or weight issues.
thanks.
Hows ya gettin' on, me ol ****?Kippens.Newfoundland and Labrador. (Canada). -
Charlie tuna said:
Patio stone is very cheap and the big box stores have a good selection of colors. They are about two inches thick, and will handle both the heat and weight much better than ceramic tile. Just for peace of mind, i would go with a patio stone. My $ .02
Hows ya gettin' on, me ol ****?Kippens.Newfoundland and Labrador. (Canada). -
So i only have one shot at this so..... 15" distance bge suggests plus 2" rise due to tablenest and maybe another 2 " for patio stone so what height should my shelf be. 17" sound ok to you guys???
Hows ya gettin' on, me ol ****?Kippens.Newfoundland and Labrador. (Canada). -
Sounds good to me, just remember the 17" is measured from the top of the bottom shelf to the bottom of the top shelf.. FYI, my tile is maybe 3/8" thick and was inlaid to sit flush with the rest of the bottom shelf..
Damascus, VA. Friendliest town on the Appalachian Trail.
LBGE Aug 2012, SBGE Feb 2014
-
I have mine setup exactly as you describe in the original. Wood shelf, 18" ceramic floor tile, table nest egg (see avatar). I think 17" is exactly right, but if you already have the egg, nest, and tile I'd just measure from the floor to the bottom of the hinge when open.
And not to be argumentative, but isn't it measured from top of bottom shelf to top of top shelf? If you measured to the bottom of the top shelf you'd still have to account for the thickness of that shelf.
Suwanee, GA -
Thanks guys 17" it is!!!Hows ya gettin' on, me ol ****?Kippens.Newfoundland and Labrador. (Canada).
-
Be over my head anyway but I think one of the barbeque mats that Canadian Tire sells would work fine.
Steve
Caledon, ON
-
RTSampson said:
I have mine setup exactly as you describe in the original. Wood shelf, 18" ceramic floor tile, table nest egg (see avatar). I think 17" is exactly right, but if you already have the egg, nest, and tile I'd just measure from the floor to the bottom of the hinge when open.
And not to be argumentative, but isn't it measured from top of bottom shelf to top of top shelf? If you measured to the bottom of the top shelf you'd still have to account for the thickness of that shelf.
Damascus, VA. Friendliest town on the Appalachian Trail.
LBGE Aug 2012, SBGE Feb 2014
-
i had the 18" ceramic floor tile under mine in the table. The tile cracked about a year ago and i just ordered the table next. I guess i was thinking that i wouldn't need any type of stone with that table nest in. Ordered it when i ordered my extra grate for grill extender. What would be the point in having both?
-
mwraulst said:i had the 18" ceramic floor tile under mine in the table. The tile cracked about a year ago and i just ordered the table next. I guess i was thinking that i wouldn't need any type of stone with that table nest in. Ordered it when i ordered my extra grate for grill extender. What would be the point in having both?
______________________________________________I love lamp.. -
So the air gap is enough to prevent a fire? Good to know....thanks Nola!!!Hows ya gettin' on, me ol ****?Kippens.Newfoundland and Labrador. (Canada).
-
@Nola is right, the air gap from the table nest is plenty. No need for a tile underneath it.Columbia, SC --- LBGE 2011 -- MINI BGE 2013
-
Ceramic tile may take the heat but after repeated heatings it may break down. Find a brickyard and buy some fire brick or common brick.Simple ingredients, amazing results!
-
The standard ceramic tile will ultimately crack from the heat. I'd definitely go with the fire brick or the 2" thick concrete pavers which are cheap and work great.
LBGE
Cedar table w/granite top
Ceramic Grillworks two-tier swing rack
Perpetual cooler of ice-cold beer
-
I have had my large BGE sitting in a table, on three 8x16" concrete pavers to provide enough surface area, on the ceramic feet for three years.
Never any temperature problems.
John in the Willamette Valley of Oregon -
Mine is sitting on a chunk of 2 x 12 long leaf pine and on the ceramic feet that came with my Egg. It gives it a good inch air gap.Simple ingredients, amazing results!
-
Going to try just the table nest with the two inch air gap and see how hot the table gets ,I may or may not need the stone/tile. Whatever it takes I'll do but I kinda like the simple clean look of just the nest alone.Hows ya gettin' on, me ol ****?Kippens.Newfoundland and Labrador. (Canada).
Categories
- All Categories
- 182.7K EggHead Forum
- 15.7K Forum List
- 459 EGGtoberfest
- 1.9K Forum Feedback
- 10.3K Off Topic
- 2.2K EGG Table Forum
- 1 Rules & Disclaimer
- 9K Cookbook
- 12 Valentines Day
- 91 Holiday Recipes
- 223 Appetizers
- 516 Baking
- 2.4K Beef
- 88 Desserts
- 163 Lamb
- 2.4K Pork
- 1.5K Poultry
- 30 Salads and Dressings
- 320 Sauces, Rubs, Marinades
- 543 Seafood
- 175 Sides
- 121 Soups, Stews, Chilis
- 35 Vegetarian
- 100 Vegetables
- 313 Health
- 293 Weight Loss Forum