Big Green Egg - EGGhead Forum - The Ultimate Cooking Experience...
There are two very delicious food holidays coming up that we wanted to share with you all because cheese and guac deserve to be celebrated! Guacamole Day is on September 16th and Cheeseburger Day is on September 18th. Happy cooking EGGheads! It's time to think about getting out to one of the many #EGGfests around the country - see a list here

Egg carten

13»

Comments

  • shtgunal3shtgunal3 Posts: 1,969
    How much does a SBGE in a carten weigh?

    ___________________________________

     

     LBGE,SBGE Sweet home Alabama........ Stay thirsty my friends .

  • MrCookingNurseMrCookingNurse Posts: 3,739
    @shtgunal3
    I'd assume under 100 lbs. just a guess


    _______________________________________________

    LBGE & SBGE (big momma and pat)
  • SmokeyPittSmokeyPitt Posts: 4,872

    mwraulst
    said:
    how do i acquire one of those egg carten's for my mini? i get everything under the sun when i try to google them.



    Which came first the chicken or the egg?  I egged the chicken and then I ate his leg wing. 
    2014 Wing King's Apprentice
  • MickeyMickey Posts: 14,102
    mwraulst said:
    how do i acquire one of those egg carten's for my mini? i get everything under the sun when i try to google them.

    Contect Scott.

    Egg Carten / Scott Lewis / 281.714.7009
    Slewis87@msn.com
    Salado TX Egg Family: 2 Large and a very well used Mini.... 5th Salado EggFest is March 14, 2015

  • MrCookingNurseMrCookingNurse Posts: 3,739
    Scott emailed me back. He's gonna look into some stuff. Thanks for y'all's help!


    _______________________________________________

    LBGE & SBGE (big momma and pat)
  • BullibeBullibe Posts: 130
    edited April 2013
    Mickey said:

    Ok back to Cartens and something you should think about. If I had both Minis, both would be in Cartens. Started to get one a year ago in Salado but got around to it this year (March 16th) and my Mini has not and will not be out of it.

    Only one problem I can see. That is some heat transfew from the bottom of Egg to the bottom of Carten. For the most part mine sits on a SS table with a towell under it to protect the SS table from scratches from moving the Carten around. Found the heat and went online for two things: first somthing to catch the heat and second to cushion setting it down. Found this materal that stated 500 protection level (not sure what it protected aggenst) so ordered a 1/4 inch for about $28. The first pic was after a 20 min 400 cook.  So orderd a 1/2 peace for about $48 to put under it. When/if it burns into the second peace I will pull all of the orange stuff.But (IMO) something is needed to cut the heat (not that it is all that hot) I think cutting would be good.

     

    imageimage
    I wonder if glueing the mat under the Carten would be better, also you wouldn't have to use the towel under it to prevent scratches ?  Maybe the aluminum would dissipate most of the heat first? Don't know, just thinking out loud...
    Redneck Riviera, Gulf Shores, Alabama
  • MrCookingNurseMrCookingNurse Posts: 3,739
    @lit
    Did you just cut a square hole? I just don't wanna butcher my table to get it in therr


    _______________________________________________

    LBGE & SBGE (big momma and pat)
  • MickeyMickey Posts: 14,102
    edited April 2013
    @Bullibe had a phone conversation with Scott on this very thing. His thoughts the total 3/4 inch or just the 1/2" alone would be to high for underneath. . He could agree on 1/8 or 1/16 for the bottom. But I have $70 in this and thinking enough. I will probably order the 1/16 next week (very weak person). That to be glued to the bottom. Now what glue to use so if not working I can get off.
    Salado TX Egg Family: 2 Large and a very well used Mini.... 5th Salado EggFest is March 14, 2015

  • LitLit Posts: 2,633
    @mickey I put my carten directly on a plastic table and cook for hours with no issue. I went 7 hours yesterday between 300-400 and not even a mark on the table. I did burgers the other night with the car ten directly on the table at 500 for probably an hour and a half and the top of the table gets warm but not close to hot.

    @Mrcookingnurse I just cut the hole and got lucky. Start smaller on the handle to handle width you can always cut it bigger. If its too big the egg handle will hit the table.
  • BullibeBullibe Posts: 130
    Mickey said:
    @Bullibe had a phone conversation with Scott on this very thing. His thoughts the total 3/4 inch or just the 1/2" alone would be to high for underneath. . He could agree on 1/8 or 1/16 for the bottom. But I have $70 in this and thinking enough. I will probably order the 1/16 next week (very weak person). That to be glued to the bottom. Now what glue to use so if not working I can get off.
    I think I would use 3M Super 77 spray adhesive, you can get a nice even film on both surfaces before sticking together, then trim the "wild" away on the sides of mat, after it's stuck. Then to remove I would pull it off and roll up as much as possible then use 3m Citrus adhesive cleaner for the residue.
    Redneck Riviera, Gulf Shores, Alabama
  • MickeyMickey Posts: 14,102
    @Bullibe I think you nailed it. Thanks
    Salado TX Egg Family: 2 Large and a very well used Mini.... 5th Salado EggFest is March 14, 2015

  • MrCookingNurseMrCookingNurse Posts: 3,739
    Custom fab is way to expensive. Just informed SWMBO that this is the father day present


    _______________________________________________

    LBGE & SBGE (big momma and pat)
Sign In or Register to comment.