Big Green Egg - EGGhead Forum - The Ultimate Cooking Experience...
We hope everyone enjoyed their Fourth of July weekend and is excited for more warm weather grilling! This week, we’ll be making these two burgers: Stuffed Portobello Mushroom and Caribbean Chicken, and also eating lots of these Ice Cream Sandwiches in honor of National Ice Cream Month! It's time to think about getting out to one of the many #EGGfests around the country - see a list here

RO charcoal

Has anybody else found nails in their RO? Just picked up some wicked good for a Boston butt this weekend. :)

Comments

  • reh111reh111 Posts: 145
    I assume you're referring to Royal Oak and, No, I have never found a foreign object, including nails in the bags that I have bought
  • FanOfFanboysFanOfFanboys Posts: 1,567
    I use RO 99% of time. Minus rock or so a bag I like it.
    Boom
  • tybishtybish Posts: 52
    I like it as well. Just thought it was strange to see a nail? Big fan of the weekend warrior for my longer cooks though!
  • nolaeggheadnolaegghead Posts: 10,759
    Rocks and nails don't suck nearly as much as plastic.  Or plutonium.
    ______________________________________________
    This is my signature line just so you're not confused.
    Large and Medium BGE, two turntables and a microphone, my friend.
    No City.

  • Charlie tunaCharlie tuna Posts: 2,191
    I will find a rock here and there about the size of a golf ball -- probably off the walla of the kiln that they are processed in, but it is clean compared to other brand i have used.
  • It is not uncommon to find nails/fence staples in about any type of wood products, as farmers in years gone by would use a tree as a fence post if it was in the right spot.  They didn't like to cut them down as they provided good shade for livestock in the heat of Midwest summers if it was in a place that was only good for pasture.  Over the years the barbed wire and attaching devices would grow into the tree.  Sawmills will reject wood to be cut if there is obvious metal sticking out of a log, and many mills use metal detectors to prescan before the blade can hit the metal.  A pal of mine used to work in a small town local mill when he and I were both much younger.  He said that hitting that stuff always meant a lot of work changing out the blade and having it sharpened.  It was also dangerous for the operators due to flying shrapnel when metal was hit.  Maybe today with the bandsaw type mills there is less of a problem in this way, but I would be quite sure that a lot of this type of wood ends up in the ricker's kilns.
    Cedar Rapids, Iowa
  • stlcharcoalstlcharcoal Posts: 816

    I posted this in a thread a few weeks ago regarding metal banding in charcoal.......along the same lines, so I'll just cut and paste it.

    Do not worry about these bands. They are part of the kiln process. All the scraps are banded together, then loaded in the kilns. After 7-10 days of heat, or when the loader pulls the charcoal out, these straps often snap. 99% of the time they are pulled out of the load like a ribbon, but sometimes they break into smaller peices.. No big deal, just throw it away.

    Charcoal comes from trees, and all kinds of objects get lodged, nailed, or grown into 50+ y/o trees. Barb wire fencing, chicken wire, nails, bullets, arrowheads, rocks, etc. The tree often forms a knot around object, so that's not a desirable piece for lumber--thus it goes in the kiln. You wouldn't believe the amount of metal that gets sorted out in the bagging process. Some of it is still inside of the charcoal chunks though--you'll see it in the ash.

    None of this gets eaten, so don't worry about it. Now, if you start finding floor scrap, molding scrap, plastic, dead mice, cigarette butts--it's cause for concern. There shouldn't be anything like that in the bag after the kilning process, and there shouldn't be anything that will give off fumes. A rock or some metal wire/banding does not give off fumes, nor hurt the BGE. Just throw it away and hope for an arrowhead next time.

    Some of the "prizes" do not get sorted out in the bagging process because they are still in the charcoal......you discover them in the ash.  When a tree has a foreign object lodged in it, it "walls" off that area and you get a knot.  Lumber is graded by the number of knots, so a really "knotty" piece is usually discarded and ends up in the kiln.

    Connect:  Website  -  Facebook  -  Twitter

Sign In or Register to comment.