Yes I have heard good things about Blue Jeans. Like "Monster" the company that started it all, BJ are reported to be really good budget cables. Some of these DYI cables can be far superior however. The best cables are all hand made because of the difficulty in assembly. This is one reason why superior cables start getting expensive.
I have one Monster cable. 30' running from my projector to my A/V reciever. High quality for sure. Rest of my cables are from either Monoprice or Blue Jean. BTW I purchased the Monster @ a discount. I know someone :) no it isn't Mangrates 8-}
Costco has some long run Wirelogic Sapphires for a pretty good deal. My Dad got me some to run a line for my TV in the loft but I haven't gotten around to it yet. Apparently, they are made by Audioquest. I used to get 50 or 60% off Monster cable through a Pro deal program when I worked at Best Buy/Myer-Emco. Those were the days..... Sadly, my income didn't match my ideas.
@Nolaegghead - was involved in HAM, after high school went to St Lawrence College for a year, VE3SLC was the call sign. That's what got me interested in Heath Kits. I turned to signal processors trying to make my guitar sound better (different). Later, after University, I worked in a design lab for digital switching with GTE so we had the equipment and time to "knock off" Heath Kits for fellow employees.
Let us know how the project goes - looks like fun. I always though acoustic feedback through the platter and tone arm/cartridge was a bigger issue than vibrations through the foot pads. You have the foot pad vibes covered. Good luck.
Legally, it's questionable; Morally, it's disgusting; Personally, I like it.
I took a different tack. I got rid of my receiver, amp, cd player and converted to a SONOS system. My daughter introduced me to this Santa Barbara company and it has changed my life..at least the way I listen to music. You can hook it up to your current system and speakers or use it exclusively. It basically connects your computer and the internet to your music system.. I listen to Pandora and my itunes almost exclusively but it is so easy to place all your music on iTunes. You can play different music in different zones, i.e. play one type of music outside, another i the kitchen and another in the bedroom.
Hooking up the last few connections....about to fire it up for the first time. Boy, dem neighbors gonna HATE dis.....
I'll give an update and post some pics. Been really busy building stuff and cooking the last 4 days (took a mini vacation)...so haven't been on the forum. I'll catch up tonight.
@Skiddymarker Thanks! I'm wet polishing - hose is attached to the grinder. Problem with the rain is it gets in the grinder and I get zapped, plus it's miserable enough trying to avoid the spray from the grinder - that piece of plexi is a shield I stay behind.
@Nola, I want concrete counter tops in my kitchen. Pretty small kitchen. Two counters maybe 10 feet total with an L in it. Roughly how much am I looking at? I know you know. Want to fly to SC, stay at my house, egg all day everyday, and build it for me??!!
Columbia, SC --- LBGE and a long anticipated MINI BGE
I remember Kenwood made a turntable with a concrete base (or similar material) that was very heavy and designed to help absorb the shocks and vibration. I had B&O turntables and nothing bugged them. This was my second one, bought in Denmark:
I gave it away to my cousin a number of years back since we had switched over to CDs.
Finished the stereo stand last night. Wet polishing cement is MISERABLE. I got soaking wet from the spray off the grinding wheel, and I was getting zapped from electricity leaking off the wet switch (it did have a GFCI, but it wasn't leaking to ground). Anyway, solved the electrocution problem with some saran wrap and nitrile gloves. I'm very pleased with the results. Need to get this in the house some how (weighs over 300 pounds). I should have the the gear on it tonight, and I'll take some final pics.
The metal studs, motorcycle valve springs and recesses all lined up perfectly. The top has a nice spring to it, and it's not going anywhere - I can even push it with the top. That's a half inch thick plexi shelf insert on the bottom.
Comments
- Spam
- Abuse
- Troll
1 • Off Topic Disagree 1Agree Like- Spam
- Abuse
- Troll
0 • Off Topic Disagree Agree Like- Spam
- Abuse
- Troll
0 • Off Topic Disagree Agree Like- Spam
- Abuse
- Troll
0 • Off Topic Disagree Agree Like- Spam
- Abuse
- Troll
0 • Off Topic Disagree Agree Like- Spam
- Abuse
- Troll
0 • Off Topic Disagree Agree Like- Spam
- Abuse
- Troll
0 • Off Topic Disagree Agree Like- Spam
- Abuse
- Troll
0 • Off Topic Disagree Agree LikeI'll give an update and post some pics. Been really busy building stuff and cooking the last 4 days (took a mini vacation)...so haven't been on the forum. I'll catch up tonight.
- Spam
- Abuse
- Troll
2 • Off Topic Disagree Agree 2Like- Spam
- Abuse
- Troll
1 • Off Topic Disagree Agree 1LikeBuilt the cart, finishing up the top. Was raining this evening, so I'm going to have to finish polishing the cement tomorrow.
- Spam
- Abuse
- Troll
0 • Off Topic Disagree Agree Like- Spam
- Abuse
- Troll
0 • Off Topic Disagree Agree LikeDespite two GFCIs, I got zapped a little bit.
- Spam
- Abuse
- Troll
0 • Off Topic Disagree Agree Like- Spam
- Abuse
- Troll
0 • Off Topic Disagree Agree Like- Spam
- Abuse
- Troll
0 • Off Topic Disagree Agree Like@Chubbs You don't want someone like me who's only made them one time doing it! I'm still fighting the learning curve!
- Spam
- Abuse
- Troll
0 • Off Topic Disagree Agree LikeI remember Kenwood made a turntable with a concrete base (or similar material) that was very heavy and designed to help absorb the shocks and vibration. I had B&O turntables and nothing bugged them. This was my second one, bought in Denmark:
I gave it away to my cousin a number of years back since we had switched over to CDs.
- Spam
- Abuse
- Troll
0 • Off Topic Disagree Agree LikeFinished the stereo stand last night. Wet polishing cement is MISERABLE. I got soaking wet from the spray off the grinding wheel, and I was getting zapped from electricity leaking off the wet switch (it did have a GFCI, but it wasn't leaking to ground). Anyway, solved the electrocution problem with some saran wrap and nitrile gloves. I'm very pleased with the results. Need to get this in the house some how (weighs over 300 pounds). I should have the the gear on it tonight, and I'll take some final pics.
The metal studs, motorcycle valve springs and recesses all lined up perfectly. The top has a nice spring to it, and it's not going anywhere - I can even push it with the top. That's a half inch thick plexi shelf insert on the bottom.
- Spam
- Abuse
- Troll
2 • Off Topic Disagree Agree 2Like