Big Green Egg - EGGhead Forum - The Ultimate Cooking Experience...
Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg at:

Facebook  |  Twitter  |  Instagram  |  Pinterest  |  Youtube  |  Vimeo
Share your photos by tagging us and using the hashtag #EGGhead4Life.

In Atlanta? Come visit Big Green Egg headquarters, including our retail showroom, the History of the EGG Museum and Culinary Center!  3786 DeKalb Technology Parkway, Atlanta, GA 30340.

Older Hobart Slicer, need some help



  • I will say from personal experience that an attached blade sharpener is not necessary.  The older blades are made from very good steel and they keep their edges for a long time.  You only need to touch them up occasionally.  You can use a fine stone and oil manually just to knock off any burrs.  If it is for home use you will never slice enough stuff to need sharpening very often.  In our restaurants we maybe touched up our blades 3-4 times a year at the most and they were used extensively.  We had Hobart and Globe slicers.

    Simple ingredients, amazing results!
  • FiremanyzFiremanyz Posts: 805
    Cabela's sells a food grade silicone in a spray can. I have found this to be the best lubricant for slicers. No not pull a rookie move and use Pam as some guys around the firehouse have done. Next time you try to use it, the slide will be locked up like Fort Knox.
  • BullibeBullibe Posts: 132
    Redneck Riviera, Gulf Shores, Alabama
  • FockerFocker Posts: 3,889
    edited January 2013

    @SamFerrise and @Bullibe,  getting the two blades professionally sharpened and may touch them up safely without the guard using Japanese chosera wetstones from the Apex. 

    @Firemanyz, thanks for the tip.  Will look into Cabela's as well.  The school this came out of gunked it up with the Pam you mentioned.  Guy I bought it from removed most of it, slides real smooth.  Depth knob is decent and will probably improve when I break it down, degrease, and lubricate.  The worm screw and gears underneath are caked with Pam.  

    Quad Cities

  • FiremanyzFiremanyz Posts: 805
    Good luck. Removing the Pam is a pain. Oven cleaner works well but make sure you use some good gloves as that stuff is very caustic.
  • FockerFocker Posts: 3,889
    Thanks.  Figured if I could remove cosmoline from a WWII Russian Mosin Nagant battle rifle, this will be a walk-in-the-park.  :))
    Quad Cities

Sign In or Register to comment.
Click here for Forum Use Guidelines.