Auber Temp Control

SteveWPBFL · December 2012

Anybody have one? Right now mine's reading grate temp about 100F higher than what the BGE temp gauge is reading ( 320F vs. 220F). I calibrated it to ice water, had to bias it -7F. Then it reads about 2F warmer at ambient than yard thermometer (88F vs. 86F).

SteveWPBFL · December 2012

Getting it dialed in. The BGE dome sensor is reading 50 F lower at the dome hole than at the daisy wheel. Controller checks out with thermapen. Got four butts on, so that may have some influence.

fairchase · December 2012

I have 1 and I really like it for over nighters. It does over shoot the target temperature by about 20 deg. initally , but then it will hold + or - 2 degrees.

I checked mine in boiling water and it was spot on. I wasn't interested in 32 degrees.

I go with the temperature reading of my Auber at grate level. Forget the mickey mouse dome thermometer.

SteveWPBFL · December 2012

Controller matched thermapen in hot water (180F). Moved BGE temp probe to daisy wheel and moved controller T/C to tie wrap on pork butts and both reading same now. Set up seems to be working ok as long as I don't open the dome.

Howdy, Stranger!

Forums

Auber Temp Control

Comments