It’s that time of year again-time to hop on out to your backyard for an EGG hunt. If you’re lucky, you’ll only have to search as far as your patio! Planning on cooking Easter Sunday
? Check out our Easter Menu
. If you’re looking for a sweet treat to enjoy with the whole family, try at least one of our sweet treats, if not both: Grilled Peeps
& Carrot Cupcakes
. Lastly, if you’re having company, our Pinterest
page has lots of ideas for entertaining. We hope you have an EGGstra tasty holiday!
The Big Green Egg headquarters has moved - come visit our new location and check out the museum! 3786 DeKalb Technology Parkway, Atlanta, GA 30340
Length of double table need help?
I am building a table for the xl I am buying. I was thinking of setting it up also for the opportunity to add a medium or large in the future. So let's say I went large and xlarge.
Can I build a 8 foot table? I guess I can build anything I want but what I am asking is do I need to have 6 or 8 legs on this thing or will four outer legs be able to do the trick. Was thinking.about 4 x4 posts and framing it with 1 x 6's. I figured that a 22" hole foe the large plus a 27" hole for the xlarge. This totals 49". Then I add say 5" on each side of the eggs to the table edge which bring my measurement to 59". Therefore the amount of space between the eggs is 37" or just over the 3 foot mark. Which should be about the right amount of space when operating both eggs. (the xl bge table plans leave about 28" of workspace for a single cooker) Obviously this would change by a few inches if I decide to go with an xlarge and a medium.
Will four legs do the trick.? I would like to avoid putting posts down the middle if possible so I can use the space between the eggs for storage. Therefore if you think 4 legs can't do it for that weight and span, then I would go with either 6 and offset the middle legs around the xl bge basically leaving a five foot span from the center leg to the other side holding the smaller egg which would be plenty of support I'm thinking. Or i could go with 8 legs to make it look symmetrical. This will be on casters.
Any help would be greatly appreciated. i have been to the naked whiz's site and seen many designs but most are for large and small. There was one xlarge and medium but I thought the workspace between the two was insufficient. In addition you are kinda guesstimating measurements in these pics based off of egg size etc.
Thanks - Michael