Find A Dealer
Report Forum Abuse
It looks like you're new here. If you want to get involved, click one of these buttons!
EGG Table Forum
Rules & Disclaimer
Salads and Dressings
Sauces, Rubs, Marinades
Soups, Stews, Chilis
Weight Loss Forum
Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing recipes by following Big Green Egg at:
Share your photos by tagging us and using the hashtag #EGGhead4Life.
In Atlanta? Come visit Big Green Egg headquarters, see our new showroom and check out the History of the EGG Museum and
! 3786 DeKalb Technology Parkway, Atlanta, GA 30340.
I need to replace my gasket (again) and am wondering what is the
latest and greatest adhesive to use with the BGE felt.
Is the 3M spray adhesive still preferred, or is there a better
bob in st lou
I just replaced my gasket this weekend. I used the Nomex gasket and the 3M 77 adhesive. Spray it on and let it sit for about 2 minutes until it gets tacky. Then put the gasket on and let it cure for 24 hours. This is important. This is my 4th gasket on this egg in 2 years and I hope the last. But before I never let it sit for the full 24 hours so maybe that contributed to the early gasket failures. Good luck
Make sure you have the Nomex gasket or get a Rutland. I believe silicone adhesive is far superior to the 3M Super 77. Use the high temp silicone found at auto parts stores. I will also add it is probably not rated for food preparation. I have a Rutland now applied with silicone and it is bullet proof.
Powered by Vanilla
for Forum Use Guidelines.