Big Green Egg - EGGhead Forum - The Ultimate Cooking Experience...
It doesn’t get much hotter than the EGG cookin’ in July! Make sure to keep yourself hydrated with a bit of whatever you’re using for the Beer Can Chicken. Ice Cream Sandwiches are also a great way to stay cool. Looking for some great ideas for a summer cook out? Try out a Pimento Cheeseburger or Dr. BBQ’s Spare Rib Surprise. Just don’t be surprised if your neighbors stop by for a quick bite when they smell what you’re cooking!

Big Green Egg headquarters has moved - come visit our new showroom and check out the museum and culinary center too! 3786 DeKalb Technology Parkway, Atlanta, GA 30340

Mini Daisy Wheel Question

FireballFireball Posts: 354
edited 9:32PM in EggHead Forum
Is there a Daisy Wheel made for the Mini? I have heard both yes and no.
Thank you.
Fireball

·

Comments

  • Tim MTim M Posts: 2,410
    slidetops.jpg
    <p />Fireball,[p]I have one for my small Egg that would probably work on the mini but I think most cooking on it is done at full speed.[p]Tim
    ·
  • J AppledogJ Appledog Posts: 1,046
    Fireball,
    The mini temp can be controlled with just the bottom vent. It takes a little practice but it works just fine. Either Chef Rd or Fingers had a top for the small that he had made. JCA

    ·
  • YBYB Posts: 3,861
    minihat.jpg
    <p />Fireball,
    This is a picture of the sliding top i made for my mini egg,it works good.[p]Larry

    ·
  • Char-WoodyChar-Woody Posts: 2,642
    J Appledog, yer a long time "pullet egg" user and I am anxious to get mine to test all the buttons.
    I wonder how a inverted small flower pot with the hole in the bottom would work for a top vent control with the lower ash vent for main control? For low and slow possibilities of course..like 5 to 8 hour rib cooks. Ect.
    ??
    C~W[p]

    ·
  • PainterPainter Posts: 464
    Char-Woody, That's what people love about you, always thinking. Would probably work wonderfully and I'm glad you'll let us know once you get your new addition. Painter

    ·
  • Char-WoodyChar-Woody Posts: 2,642
    YB, and that thermometer spacer is also interesting..good job.
    C~W[p]

    ·
  • Char-WoodyChar-Woody Posts: 2,642
    Painter, Thanks, but when it comes to "thinking" I will have to quote Ed Fisher, the owner of BGE when he told me, "its amazing to him how many different ways this forum group can innovate" in using the BGE".
    Just glad to be a part of the scene...
    Cheers...
    C~W[p]

    ·
  • CharlyCharly Posts: 23
    Fireball,
    You can use a daisy wheel for your new Mini.Buy a daisy wheel for a small and also some BGE gasket material.One side of the gasket will be self-adhesive,which you will wrap the "inside" of the daisy collar with.Keep wrapping and fitting until the collar is snug and it won't fall off when you open the dome.Once your finished it will look and cook like any other larger egg.You might also want to get another mini cooking grid if you want to egg anything indirect,I had a hard time finding an after market grid that was small enough.I hope this helps and you enjoy your new toy.

    ·
  • J AppledogJ Appledog Posts: 1,046
    Great idea, Char-Woody, but if I were to do a low & slow smoke I'd use a bigger egg so I could put more on it. JCA

    ·
  • YBYB Posts: 3,861
    Char-Woody,
    Thanks,you will love the mini.Wal-Mart sells a folding bar stool that makes a great stand for the mini.[p]Larry

    ·
  • Char-WoodyChar-Woody Posts: 2,642
    YB, your right..that was another of yoru inspirations..I do have a small chimnea stand that will accept the mini I think. Earl shows one on the ice in Canada. Same thing.
    C~W[p]

    ·
  • RhumAndJerkRhumAndJerk Posts: 1,506
    Charly,
    That is exactly what I use.
    R&J[p]

    ·
Sign In or Register to comment.