Big Green Egg - EGGhead Forum - The Ultimate Cooking Experience...
Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg at:

Facebook  |  Twitter  |  Instagram  |  Pinterest  |  Youtube  |  Vimeo
Share your photos by tagging us and using the hashtag #EGGhead4Life.


In Atlanta? Come visit Big Green Egg headquarters, including our retail showroom, the History of the EGG Museum and Culinary Center!  3786 DeKalb Technology Parkway, Atlanta, GA 30340.

Spark Containment

Moulton_1924Moulton_1924 Posts: 3
edited June 2012 in EggHead Forum
I've noticed recently that even with the mesh draft door in place sometimes a spark can make it out of the bottom of the firebox and on to my deck.  I'm trying to find ways to minimize that happening.

One idea I had was to rotate the firebox so that the large opening does not line up so directly with the draft door.  I'd rotate it as far as I could while still being able to clean out ash. I don't think this would reduce airflow significantly.

My egg is about five years old and I've had to order a new replacement draft door mesh.  I'm thinking that I could keep both and place the old one up against the firebox opening as an extra measure of safety.

Has anyone else tried ways of reducing the chance of sparks making it out?


Comments

  • lousubcaplousubcap Posts: 14,859
    I've never had a spark get out through the mesh screen so I can't help in that regard.  If you rotate the fire box then as you note, you will have some impact on the air flow.  Just watch your vent settings closely as the lower one will have to change to compensate.  You may want to evaluate the lump you are using if this level of sparking is causing concern.
    Louisville;  L & S BGEs, PBC, Lang 36; Burnin' wood in the neighbourhood. # 38 for the win.
  • tgklemantgkleman Posts: 216
    Another option could be a grill mat under your egg so if a spark makes it out, it lands on a fire-proof mat.
  • Little StevenLittle Steven Posts: 28,780
    Valuable thread. There are at least two of us on this forum that have had major house fires. Mine was not directly related to the egg but the other one was an errant ember from the top vent of the egg. Five plus years and we have just settledwith the insurance

    Steve 

    Caledon, ON

     

  • A little more info:  The charcoal I was using was Basques Hardwood Charcoal.  I've been using it for a few years.  The sparking I mention doesn't happen all the time usually just when I first get the charcoal going with an electric heater and then stir the charcoal to distribute the lit bits.  Sometimes when I do that the first starts making like a Rice Crispies Snap, Crackle, Pop sound and little bits of ember start exploding.  That's when it could start shooting out the bottom. 

    It doesn't continue during the cook proper but I'm thinking of a worst case scenario where this happens during an overnight cook....
  • AdamdAdamd Posts: 160
    I would go the fire proof mat idea. Seems like the easiest, safest, and cheapest way to make sure you are protected. I would try my best to protect my house/deck when using a charcoal grill that's for sure. It only takes a little fire to destroy your deck.

    I have not seen any sparks fly out of my egg before from the bottom vent, but I don't pay much attention since the ground concrete.
  • lousubcaplousubcap Posts: 14,859
    For grill mat(s)-I use one of those big aluminum pans from auto supply stores under the BGE to minimize the charocal residue on the patio (concrete). 
    Louisville;  L & S BGEs, PBC, Lang 36; Burnin' wood in the neighbourhood. # 38 for the win.
  • DIXIEDOGDIXIEDOG Posts: 109
    Is your charcoal getting wet at all?   I've noticed that if charcoal gets wet it will spark like crazy even after it has sat and dried out....not sure why but I've observed it several times.


    I like the fireproof mat idea, seems like a good just in case precaution.
Sign In or Register to comment.
Click here for Forum Use Guidelines.