Big Green Egg - EGGhead Forum - The Ultimate Cooking Experience...
Welcome to the EGGhead Forum - a great place to visit and packed with tips and EGGspert advice! You can also join the conversation and get more information and amazing kamado recipes by following Big Green Egg at:

Facebook  |  Twitter  |  Instagram  |  Pinterest  |  Youtube  |  Vimeo
Share your photos by tagging us and using the hashtag #EGGhead4Life.


In Atlanta? Come visit Big Green Egg headquarters, including our retail showroom, the History of the EGG Museum and Culinary Center!  3786 DeKalb Technology Parkway, Atlanta, GA 30340.

Gasket hints?

BoilereggerBoileregger Posts: 474
edited January 2012 in EggHead Forum

Like many others, after 3 weeks of egg ownership, my gasket failed.  The fine folks at BGE sent me a high heat version for installation, and I've already done the acetone thing and cleaned up the rim.  I was just wondering if anyone has any good tips on the actual installation process - I have my super 77 already and am planning on using the paint brush method for applying it, and am not planning on taking the dome off.  Any "lessons learned" though would be appreciated.

Thanks.

Comments

  • BuckdodgerBuckdodger Posts: 948
    edited January 2012
    I did a search this AM...typed in Big Green Egg Gasket Replacement. Found a video that explains the whole replacement process. Big Green Egg Gasket Replacement - You tube. Search was on Yahoo !!  

    The Naked Whiz site shows how to install the Rutland gasket. Which will be my next gasket of choice.

    Bob
    Alex City Al

    Alexander City,Al
  • BOWHUNRBOWHUNR Posts: 1,482
    My advice, throw the "high heat" version in the trash and install a Rutland or run no gasket at all.  If you elect to install the BGE replacement don't worry too much about the prep cause you WILL be doing it again.

    Mike
    Omaha, NE

    I'm ashamed what I did for a Klondike Bar!!

    Omaha, NE
  • GatoGato Posts: 766
    I painted the rim with the paintbrush method, but sprayed the gasket material. Hard to brush it on the gasket. Only spray what you are going to use for the first rim. After spraying have a helper hold the tail as you place it. Repeat for the second rim. Assuming we are talking about the nomex.
    Geaux Tigers!!!
  • ChokeOnSmokeChokeOnSmoke Posts: 1,897
    edited January 2012
    I agree with BOWHUNR.  If you're going to spend the time putting on another gasket, go with the permanent solution of a Rutland, bonded with Permatex Ultra Copper.  You can do it for under $20 for a XL and even less for a "L" and smaller.
    Packerland, Wisconsin

  • MickeyMickey Posts: 18,598
    Go without..................
    Salado TX Egg Family: 2 Large and a very well used Mini, added a Mini Max (I'm good for now). 

  • I tried without and my lump took a long time to go out - don't want to be wasteful. And I thought I read that the Rutland was a potential food hazard, so that's why nomex is my choice. Wasn't planning on spraying both the rim and the gasket, but I guess that makes sense. Thanks.
  • GatoGato Posts: 766
    My nomex has held up fine so far. It was free so why not use it. When it's done I may try something else. I think they do recommend the 77 on both surfaces now. Also, don't let the gasket hang over on the inside of the egg.
    Geaux Tigers!!!
  • ChokeOnSmokeChokeOnSmoke Posts: 1,897
    edited January 2012
    And I thought I read that the Rutland was a potential food hazard
    If this were true, literally hundreds of fellow eggers (including myself) are gonna drop dead any day now!!!
    Packerland, Wisconsin

  • Little StevenLittle Steven Posts: 28,786
    If you are going to use the nomex put it in the dryer on hot for at least fifteen minutes. It is known to shrink if you don't

    Steve 

    Caledon, ON

     

  • GatoGato Posts: 766
    As you install it do not try and stretch it. You will have plenty of material. I wonder if this is what causes the shrinkage??
    Geaux Tigers!!!
  • danv23danv23 Posts: 761
    Rutland

    The Dude: This is a very complicated case, Maude. You know, a lotta ins, lotta outs, lotta what-have-you's. And, uh, lotta strands to keep in my head, man. Lotta strands in old Duder's head. Luckily I'm adhering to a pretty strict, uh, drug regimen to keep my mind, you know, limber.

    Walter Sobchak: Nihilists! *uck me. I mean, say what you want about the tenets of National Socialism, Dude, at least it's an ethos. 

    Cumming, GA

    Eggs - XL, L, Small

    Gasser - Weber Summit 6 Burner

Sign In or Register to comment.
Click here for Forum Use Guidelines.